| project | K-550 | ||
| Machine part standard specifications | |||
| Range of work | X axis travel | 550mm | |
| Y axis travel | 500mm | ||
| Z axis travel | 300mm | ||
| Spindle nose to table surface | Standard version: 130-430mm | Heightened version: 280-580mm | |
| Worktable | Table size (X-axis direction, Y-axis direction) | 500 x 650mm | |
| Max. table load | 300kg (uniform load-bearing) | ||
| Table shape | T-slot nominal 14 x interval 125mm x 5 | ||
| Spindle | Type | Built-in spindle | |
| Spindle speed | 30000RPM | ||
| Spindle end (nominal spindle number) | 7/24 taper BBT 30 | ||
| Spindle motor | 7.5KW | ||
| Maximum clamping tool diameter of spindle | 16mm | ||
| Feed rate | Fast forward speed X/Y/Z | 60/60/60m/min (out of the machine, the three axis is set to 18m/min) | |
| Cutting feed rate X/Y/Z | 1-30,000mm/min | ||
| Maximum acceleration X/Y/Z | 0.4g/0.4g/0.4g | ||
| Tool holder magazine | Tool holder type | BBT 30 | |
| Tool number of tool magazine | 24 tools | ||
| Max. tool diameter | 60mm (full knife) | ||
| Neighboring Knife | 120mm | ||
| Max. tool length | 210mm | ||
| Tool selection ways | Randomly nearby | ||
| Max. tool weight | 3kg/hand | ||
| Tool change time (tool to tool) | 1.55 seconds | ||
| Accuracy | Positioning precision | ≤0.005mm | |
| Repeating positioning precision | ≤0.003mm | ||
| Required power source | Air pressure source | 6.5Kgf/cm² | |
| power source | 3x380,10kVA | ||
| Machine size | Machine size | 2780x3800x 2480mm | |
| Machine weight | 5000kg | ||
Workpiece material: forged aluminum
Machining tool: D8
Spindle speed: 18000RPM
Finishing time: 12min
Workpiece size: Φ83*28mm
Workpiece material: S136ESR
Machining tool: R1
Spindle speed: 50000RPM
Finishing time: 20h
工件尺寸：60*40*35mm
Workpiece material: S136ESR
Machining tool: CBN-R1
Spindle speed: 30000RPM
Finishing time: 10h12min
Workpiece size: 80*50*30mm
Workpiece material: aluminum 6063
Processing tool: PCD-R8
Surface roughness: Ra0.21μm
Finishing time: 3min
Workpiece size: 62*38*12mm
Workpiece material: aluminum 6063
Processing tool: PCD-R8
Surface roughness: Ra0.2μm
Finishing time: 9min18s
Workpiece size: 33*18*13mm
Workpiece material: aluminum 6063
Processing tool: PCD-R8
Surface roughness: Ra0.22μm
Finishing time: 29min
Workpiece size: 150*75*14mm
0769-89002798
Follow us to learn about Keruisi!
Copyright ©2021 Guangdong Precise Numerical Control Technology Co.,Ltd.All Rights Reserved Guangdong ICP No. 2021070249
0769-89002798
Follow us to learn about Keruisi!